Dry cleaner · Wet only

Wet Only Starter Pack for opening a dry cleaner

An equipment line for a new dry cleaner: washer, dryer, ironing and bagging, with a lower investment and BÜFA Care 4.0 wet cleaning only.

Garment finishing in a modern dry cleaner with wet cleaning
Wet only
No solvent
Care 4.0
Exclusive chemistry
Start
Essential start-up line
360°
Study · installation · chemistry

A modern dry cleaner, without a heavy investment

For a new shop, or for anyone who wants wet cleaning from day one — not a full perc line.

💶

Lower investment

The essential equipment a dry cleaner needs to open — not a full industrial line.

💧

Wet only

Chemistry is BÜFA Care 4.0 only. There is no solvent machine in the pack.

👔

A complete flow

Wash, dry, iron and bag — the garment leaves ready for the customer.

📐

TARAX study

Space, utilities and training on the Care 4.0 process — part of the setup.

What a wet-only dry cleaner is

In a classic dry cleaner, part of the work uses solvent and part uses water. In wet only, the whole flow is water: sorting, a wash with controlled mechanical action, drying, ironing and bagging. The chemistry and process system is BÜFA Care 4.0.

TARAX recommends it when the shop is opening now and the volume covers everyday clothes, shirts, wool and delicates. If part of the volume still needs solvent, see the options for dry cleaners.

Why this line for the start

A small dry cleaner opens with a washer that spins hard, a dryer that follows the volume, a table that finishes the garment and a way to seal the bag. A tunnel, a second press and a perc machine stay off this line.

The LA-14 TP2 E (13/14 kg) and the SR-18 TP2 PLUS E (16.5/18.3 kg) work as a pair: the dryer takes the load that leaves the washer. The Varioline CR2 with the SG66 finishes the garment for one iron. The dosing pumps keep the dose steady, so the result does not change from one pair of hands to the next.

Washer LA-14 TP2 E · Dryer SR-18 TP2 PLUS E · Varioline CR2 table · SG66 steam generator · Dosing pumps

Times depend on the load and the program. The process asks for a drum of at least 60%, low mechanical action and a hard spin before the dryer. The target is about one hour from wash to finishing. The kW stay per machine in the table — the study ties them to the room.

From intake to the bag

Four steps and chemistry on one line. TARAX sets programs, dosing and finishing. The garment comes in sorted, leaves with a high spin, dries gently and finishes on the table. The bag is sealed in the shop.

01

Wash

Light or dark, drum at least 60%. The LA-14 TP2 E spins at G-factor 500.

02

Drying

The SR-18 TP2 PLUS E dries gently. Exhaust air is Ø 200 mm.

03

Ironing

The Varioline CR2 finishes the garment. The SG66 supplies the steam, for one iron.

04

Bag

The HP630 KST seals the delivery bag. The garment leaves the shop ready.

What the Starter Pack includes

A fixed line for opening a shop: one washer, one dryer, one table with a steam generator, a bag sealer and dosing pumps. The figures come from the technical sheets. The study confirms the E / PLUS E version for your room.

Role Machine Points from the technical sheet
Wash Fagor LA-14 TP2 E 13/14 kg · 130 L · G-factor 500 · 9 kW heating · 788 × 869 × 1,307 mm
Drying Fagor SR-18 TP2 PLUS E 16.5/18.3 kg · 330 L · electric 18 kW · exhaust Ø 200 mm · 785 × 1,125 × 1,694 mm
Ironing VEIT Varioline CR2 Board 1,400 × 500 mm · suction and blowing · 0.95 kW
Steam VEIT SG66 2.2 kW · about 3 kg/h · one iron · 230 V · mounts on the table
Bag HAWO HP630 KST Bag sealer for the delivery bag
Dosing Dosing pumps Automatic dose of Polar, Carat, Citro and Protect Pro on every cycle

Figures from the Fagor LA TP2, Fagor SR-18 TP2, VEIT Varioline CR2 and VEIT SG66 / 2366 sheets. The study confirms the E / PLUS E version and the utilities of your room.

What TARAX takes on and what you prepare

In the pack

  • The equipment in the line, with no solvent machine.
  • Space and utilities study.
  • Care 4.0 programs, dosing setup and commissioning.
  • Training: light/dark, the cycle and finishing.

Yours to prepare

  • Room, water, drain and electrical board.
  • Dryer exhaust Ø 200 mm and operating permits.
  • A counter and a stock of bags and chemistry.
  • A press, tunnel or spotting station — a second step, with a new study.

A two-page proposal you can keep

The line, how a garment moves, the chemistry and what stays out. It is not a price quote — the price follows the space study.

BÜFA Care 4.0 only, from day one

The stack is Ozerna Polar, Lizerna Carat, Lizerna Citro and Lizerna Protect Pro. Protect Pro replaces the former Lizerna Conditioner and is PFAS-free. TARAX sets the dose on the pumps and trains the light/dark sort.

Care 4.0 page · Article on Care 4.0

BÜFA

BÜFA Care 4.0 only

Ozerna Polar, Lizerna Carat, Lizerna Citro and Lizerna Protect Pro. Sort light/dark only, drum at least 60%, target about one hour from wash to finishing.

Care 4.0 page

Frequently asked questions

The shop runs on water and BÜFA Care 4.0 only. A solvent dry-cleaning machine is not included.
For a new dry cleaner, or for a lower opening investment, when the work is covered by wet cleaning.
Yes. The Starter Pack is the base. A press, an extra table or larger machines can come in a second step, with a new study.
BÜFA Care 4.0 only. TARAX sets the dosing and trains the team on the process.
Water, a drain, an electrical board and dryer exhaust Ø 200 mm. Footprints and kW are in the table and the brief. The study ties them to your room — we do not add the kW into one ready-made supply.
No. It describes the line and the process. We price it after the space and volume study.
For wet only, the base is a washer, a dryer, an ironing table with steam, a bag sealer and dosing pumps. The Starter Pack ties them into one line. A press and a tunnel wait for a second step.
It covers many everyday garments and delicates with water and Care 4.0. Garments whose volume still needs solvent do not belong on this line. The study settles that before the order.
Everyday clothes, shirts, wool and delicates, sorted only into light and dark. Time and program depend on the load. TARAX training covers the process in the shop.

Quote

Request the Wet Only Starter Pack

Tell us the space and the expected volume — we come back with the composition, utilities and Care 4.0 training.

Phone

210 010 2808

Address

3 Agias Marinas, Paiania

Hours

Mon–Fri 9:00–17:00

Newsletter

Stay informed

Product news, installations and practical solutions for laundry & dry cleaners — in your inbox.