Why we talk about a new platform — not a “larger Giant-C”

The line Giant-C / Titan-C already covers self-service and compact OPL with stackable 10–15 kg pairs. The new LG Professional Laundry aims elsewhere: larger loads (up to 30 kg), Heat Pump drying with no external exhaust, and machines that can go into basements, older buildings or floors where ducts are expensive or impossible.

At TARAX we present the line as LG Zeus — the same portfolio LG promotes worldwide with the tagline “Innovation Built to Lead”. It does not replace the C-series; it complements them upwards, for sites with heavy daily volume and energy-efficiency requirements.

Wash and dry in one machine, with no load transfer, in about 60 minutes — with Dual Inverter Heat Pump and ductless installation. LG Professional Laundry catalogue · Combo 25/16

What changes in practice for a business

Three problems that often appear in Greek installations find a direct answer in the new range:

  • Ducts and space. The dryers and the combo are ductless Heat Pump — no external exhaust needed. Less civil works, easier placement in existing laundries.
  • Cycle time and staff. Combo 25/16 completes wash + dry without transfer to a second machine; ideal when staff is missing or when space does not allow stacked columns.
  • Energy and fabric. Lower drying temperature with Heat Pump, Sensing Dry to avoid overdry, and AI weight detection for water / detergent per load.

The six machines

Each model has its own specs page in the TARAX catalogue. Below is the quick view — tap for full technical specifications.

Washer-Dryer Combo

Washers

Heat Pump dryers

The full official catalogue: CLS LG Zeus Catalogue (PDF). All machines appear individually and in the product catalogue.

Technology with a business impact

The catalogue organises capabilities into Technology, ESG and Maintenance. In practice, what matters in the installation study is:

  • Dual Inverter HeatPump + Dual Action Heat Exchange — faster drying with lower consumption; twin compressor 52.5 cc/rev on the combo and the dryers.
  • Ball Balancing System — drum stabilisation for high-spin up to 520 G at 1100 rpm (20/25 kg models)· less vibration, less moisture before the dryer.
  • Twin Spray — spray inside the drum for more even wetting and shorter wash cycles.
  • Sensing Dry — humidity sensors that stop when the load is ready, protecting linens and towels from overdry.
  • AI Technology & FOTA — load / condition sensing and over-the-air software updates via cloud / device management.
  • Auto Weight Detection — adjustment of water, detergent and energy per load (5-stage on the washer according to the catalogue).
  • Wet Cleaning — wet cleaning cycle support on washer, dryer and combo as an alternative to part of classic dry clean.

Maintenance without drama

LG emphasises serviceability: Front Service Ready (front access to PCB, pumps, heater), forklift structure for safe moving on site, and on the Heat Pump Cleaning Assistance — spraying the heat exchanger on every cycle so manual cleaning is infrequent (the catalogue cites an order of magnitude of about every six months, depending on use and environment).

Proactive Customer Care and app-based management aim at timely alerts before downtime — useful in hotel and hospital OPL with tight maintenance windows. Programs Tub Cleaning / Tub Sanitary keep the drum clean at high hygiene temperatures.

Where each category fits

  • Hotels — combo for floor pantry or satellite laundry· washer 25/30 + dryer 25/30 for a central unit without ducts in difficult buildings.
  • Hospitals / clinics / nursing homes — high capacity, hygiene cycles, wet cleaning option and remote monitoring for stable operation.
  • Laundromats & commercial plants — large dryer doors (up to Ø731 mm), high Heat Pump throughput and lower installation cost without ducts.
  • Business OPL — when daily volume exceeds the 10–15 kg of the C-series and you need one or two large machines instead of many columns.

The choice between Combo and a Washer + Dryer pair depends on layout, peak hours and whether staff can move loads. TARAX does the capacity and dimension study before the order.

How you proceed with TARAX

We start from volume (kg/day), available space and whether exhaust is possible. From there we propose Combo or a Washer + Dryer line, check utilities and transfer routes (forklift), and coordinate installation with metering or payments where needed — as we already do on laundromats and hospitality projects.

Call 210 010 2808 or send a request via the contact form for a quote and technical advice.

Technical data from the official LG Professional Laundry catalogue (CLS_LG_Zeus_Catalogue_Master). Dimensions and weights are manufacturer estimates; cycle times depend on load and program. Electrical voltage is not stated in the brochure — confirm with the TARAX technical team before installation.